Keyless Entry

Opening the Door is just the Beginning

Sure the NX1701E card reader was designed for keyless door entry ut it can do so much more. With the card in your hand you can open the door, arm or disarm your alarm system, turn on or off other equipment such as the air conditioning and control lights and appliances using X-10 automation.

A photo of a keyless door entry point

The Card is You

The NetworX reader "learns" the unique smart card serial number and allocated each one to a user of the alarm system. Now there is no need to enter your code, just present your card at a reader and turn the alarm system on or off.

Make your Life Simpler

The readers can even help you present false alarms by disarming the system before opening the door or by preventing access when the alarm is armed. Once the alarm system is disarmed visitors can safely open the door and move around inside the house without setting of alarms.

The new NetworX card readers make using your NetworX panel even easier

Not Everyone needs a Card

Your system can now be programmed to automatically unlock and re-lock the door for a specified period. When the first valid card is badged at the reader, the door is latched unlocked allowing everyone else free access. The door is automatically re-locked at the programmed time.

Specifications

The NetworX NX1601E is a proximity card reader/door control module used to expand the capabilities of the NetworX NX16 control panel.

  • Microprocessor-controlled.
  • Includes one (1) low current trigger output, which can be used to control a door strike relay.
  • Up to 4 card readers can be connected to the NetworX NX16 control panel.
  • LEDs can be programmed to follow the output and/or the armed or ready status of the system.
  • Has an optional optical tamper switch.
  • Up to 4 readers maximum per NX16 system.
  • Readers can be assigned to any combination of 8 areas.
  • Self-addressing on NX16 code pad buss & monitored by the NX16.
  • Maximum 99 cards or tags – one per user (system "learns: NX smart cards – no programmer required).
    • (NOTE: NX148E LCD code pad is required to correctly view card history events).
  • Card scan functions.
    • LED1 – "On" to send User Code Entry function to the control panel
    • LED2 – "On" to activate the Full Armed mode
    • LED3 – "On" to activate the Partial Armed mode
    • LED4 – "On" to send the Disarm function to the control panel
    • LED5 – "On" to send Auxiliary Function #1 to the control panel
    • LED6 – "On" to send Auxiliary Function #2 to the control panel
    • LED7 – "On" to broadcast an X10 function
    • LED8 – "On" to activate the onboard open collector output
  • 8 time schedules per card reader.
  • Card scan time 0 to 2.55 seconds.
  • Relay output time 0 to 255 seconds.